Save it. Practice it. Live it. No gatekeeping 🔗 Fanning is so easy when you do it right 🪭 1. Grab 5mm from the base of the lash. This leaves you enough room to pinch under the tweezer prongs 🥢 2. Make sure the fibres are aligned. If the pickup is wonky the fan is wonky. 3. Pull towards you. Bump the fibres off the strip. You base should be perfectly square. 4. Pur the fibres in the flattest part of your fingers. Touch your fingers closed. The fibres are delayed don’t apply too much pressure. 5. Once your fingers are lightly closed open your tweezer up HALF A MILLIMETER. This keeps the fibres from getting messy. You just want the fibres to squeak open 1 by 1. 6. Close your tweezer and apply light pressure when you’re happy with the result. 7. Dip into the adhesive and run your fan through the notch. Release your tweezer pressure so the fibres can become more symmetrical 🪭 Products: 1. Fan gadget glue ring 2. RaqpunZeL tweezer 3. Cashmere lashes 4. Glue shuttle 5. Magical bond adhesive 🛒 Www.LASHGOD.cA